This guide outlines the most common components found in residential window systems. Each section describes the hardware or part type and includes an image placeholder for visual reference.
The frame is the outer structure holding the window. The sash is the movable or fixed panel that holds the glass. Sashes can slide, swing, or tilt depending on the window type (e.g., casement, double-hung, slider).
Flexible material applied between sash and frame to seal out air, water, and dust. Common types include foam, bulb, fin, and compression seals.
The insulated glass unit (IGU) is typically composed of two or more panes separated by a spacer and sealed to provide insulation. Available in clear, low-E, tinted, or laminated configurations.
Includes cam locks, sash locks, or lever locks that secure the sash in closed position. Varies depending on window type (single-hung, casement, awning, etc.).
Metal components that allow the sash to swing open or pivot. Casement windows use side hinges; tilt windows use pivot bars or tilt latches.
Used in double-hung and single-hung windows to counterbalance the weight of the sash. Common types include spiral, block & tackle, or coil balances.
Removable mesh panels that prevent insects from entering when the window is open. Typically made of aluminum, fiberglass, or stainless steel mesh.
Please fill out this form with details of your glass
repair or replacement request. A Beck Glass team member will
contact you within 1-3 business days. NOTE: the measurements are for quoting purposes only,
the actual measurements will be taken on site.
If this is an emergency, please contact us during office hours at 604-421-888 or after hours at 604-250-4047